How to pair Bernafon hearing aids with a computer manual

You can connect your PC to your hearing aids, to stream audio and have video or audio calls.

Before you start #

You need to use a SoundClip-A accessory to connect your hearing aids to your computer. See more about SoundClip-A

First, pair your hearing aids with your SoundClip-A #

Ensure SoundClip-A is powered off #

Press and hold the multi-button for approximately six seconds until the power indicator is off.

Turn your hearing aids off #

• For hearing aids with disposable batteries, open the battery drawer
• For rechargeable hearing aids, turn them off by pressing the lower button of each hearing aid for three seconds

Turn your hearing aids on #

• For hearing aids with disposable batteries, close the battery drawer
• For rechargeable hearing aids, turn them on by pressing the lower button of each hearing aid for two seconds
• Your hearing aids are now ready for the first connection with the SoundClip-A. You now have three minutes to complete the pairing.

Turn SoundClip-A on #

Press and hold multi-button for approximately three seconds, until power indicator shows steady green.
SoundClip-A will now search for your hearing aids. The status indicator will blink yellow.

Establish a connection #

Place SoundClip-A close to your hearing aids, at a maximum distance of 20 cm.
A successful connection is indicated by the status indicator showing steady yellow.

Next, connect the SoundClip-A to your PC #

Turn on your SoundClip-A.
Go to your computer’s Bluetooth® menu.
Select SoundClip-A and connect to it.